How stainless steel coils turn into plates and with etched and notices

2023-09-09 16:30:04
How stainless steel coils turn into plates with etched : 1. Use the hoist to put the roll on the opening machine, and the staff will adjust the parameters of the kaiping machine. 2. Wait for the machine, then set it to a certain length, and cut it flat 3.Put all the flat onto to ecthed machines with different patterns, Notices: 1.If the stainless steel plate is attached to the surface of the workpiece when heating the oil, the thickness of the oxide in the oil attachment part and the thickness and composition of the oxide in other parts are different, and carburizing will occur. The carburized part of the matrix metal under the oxidation will be seriously eroded by acid. The oil droplets emitted by the heavy oil burner at the beginning of combustion, if attached to the workpiece, have a great impact. The fingerprint of the operator is also affected when attached to the workpiece. Therefore, do not touch the stainless steel parts directly with your hands, do not make the workpiece stained with new oil, and wear clean gloves to operate. 2.If there is lubricating oil attached to the surface of the workpiece during cold processing, it must be fully degreased in trichloroethylene degreasing agent and caustic soda solution and then cleaned with warm water, and then heat treatment. If there is debris on the surface of the stainless steel plate, especially when organic matter or ash is attached to the workpiece, heating will of course have an effect on the oxide. Above that information, just be careful and learn more, the quality of stainless steel will be better.

Home WhatsApp Mail Inquiry